Framework Agreement
with Thailand
THE
REPUBLIC OF INDIA
 |
THE
KINGDOM OF THAILAND
 |
THE GOVERNMENT OF THE REPUBLIC OF INDIA AND THE GOVERNMENT OF THE KINGDOM OF
THAILAND (hereinafter referred to as "the Parties"),
RECALLING the Framework Agreement for Establishing Free Trade Area
between the Government of the Republic of India and the Government of the
Kingdom of Thailand, done at Bangkok on October 9, 2003 (hereinafter referred to
as "the Framework Agreement");
SEEKING to incorporate into the Framework Agreement the Interim Rules of
Origin applicable to the products covered under the Early Harvest Scheme; and
NOTING that Article 12 (4) of the Framework Agreement provides that
amendments thereto shall be mutually agreed upon in writing by the Parties;
HAVE AGREED AS FOLLOWS:
ARTICLE 1
Amendment to the Early Harvest Scheme
1. Article 7(2)(ii)(a) of the Framework Agreement shall be amended as
follows:
- Tariff Reduction and Elimination
(a) The products covered under this Article shall be subjected to the
following tariff reduction and elimination:
| Period |
Tariff reduction on applied MFN tariff
rates as of 1st January 2004 |
| 1.9.2004 – 31.8.2005 |
50% |
| 1.9.2005 – 31.8.2006 |
75% |
| 1.9.2006 |
100% |
2. The following products shall be removed from Annex – I of the
Framework Agreement:
| No. |
HS. |
DESCRIPTIONS |
| 18 |
390210 |
POLYPROPYLENE, IN PRIMARY FORMS |
| 23 |
390760 |
POLYETHYLENE TEREPHTHALATE IN PRIMARY FORMS |
3. Pursuant to Article 7(2)(iii) of the Framework Agreement, the
Interim Rules of Origin set out in the Annex of this Protocol shall be
applicable to the products covered under the Early Harvest Scheme.
ARTICLE 2
Entry into Force
4. This Protocol shall enter into force on the 31st of August, 2004.
IN WITNESS WHEREOF, the undersigned, being duly authorised
thereto by their respective Governments, have signed this Protocol.
DONE at New Delhi this 30th day of August,
2004 in duplicate in the English language.
|
FOR THE GOVERNMENT OF THE REPUBLIC OF
INDIA
(Kamal Nath)
Minister of Commerce and Industry
|
FOR THE GOVERNMENT OF THE KINGDOM OF
THAILAND
(Watana Muangsook)
Minister of Commerce
|
back

INTERIM RULES OF ORIGIN
FOR PRODUCTS ELIGIBLE FOR PREFERENTIAL TARIFF FOR THE EARLY HARVEST SCHEME
UNDER THE FRAMEWORK AGREEMENT FOR ESTABLISHING FREE TRADE AREA BETWEEN
THE REPUBLIC OF INDIA AND THE KINGDOM OF THAILAND
Title/ Commencement
These rules may be called the ‘Interim Rules of Origin’. In determining
the origin of products eligible for the preferential tariff concessions for the
Early Harvest Scheme pursuant to the Framework Agreement between the Republic of
India and the Kingdom of Thailand (hereinafter referred to as "the
Agreement"), the following rules shall apply:
Rule 1. Application
These rules shall apply to products consigned from the territory of either of
the Parties. These rules shall be superseded and replaced by the Rules of Origin
to be negotiated and implemented by the Parties under Article 3(6)(ii) of the
Agreement for FTA in goods.
Rule 2. Definitions
For the purpose of the interim rules of origin:
"A Party" means the individual parties to the Agreement, that
is either the Republic of India or the Kingdom of Thailand;
"CIF value means the price paid to the exporter for the product when
it arrives at the port of importation. The exporter must pay the costs, freight,
and insurance necessary to deliver the product to the named port of destination.
The valuation shall be made in accordance with the Agreement on the
implementation of Article VII of GATT 1994.
"FOB value means the free-on-board price paid to the exporter for
the product when it leaves the named port of shipment. Thereafter, the importer
will assume the costs including the necessary expenses for the shipment. The
valuation shall be made in accordance with the Agreement on the implementation
of Article VII of GATT 1994.
"Harmonized system" means the nomenclature of the Harmonized
Commodity Description and Coding System defined in the International Convention
on the Harmonized Commodity Description and Coding System (done at Brussels on
14 June 1983) including all legal notes thereto, as in force and as amended from
time to time;
"Identical and interchangeable materials" means materials
being of the same kind and commercial quality, possessing the same technical and
physical characteristics, and which once they are incorporated into the finished
product cannot be distinguished from one another for origin purposes by virtue
of any markings etc. ;
"Indirect material" means goods used in the production, testing
or inspection of goods but not physically incorporated into the goods, or goods
used in the maintenance of buildings or the operation of equipment associated
with the production of goods, including:
-
fuel and energy;
-
tools, dies and moulds;
-
parts and materials used in the maintenance of equipment and buildings;
-
lubricants, greases, compounding materials and other materials used in
production or used to operate equipment and buildings;
-
gloves, glasses, footwear, clothing, safety equipment and supplies;
-
equipment, devices, and supplies used for testing or inspecting the
goods;
-
catalysts and solvents; and
-
any other goods that are not incorporated into the good but whose use in
the production of the good can reasonably be demonstrated to be a part of
that production.
"Material" means raw materials, ingredients, parts,
components, subassembly and/or goods that are physically incorporated into
another good or are subject to a process in the production of another good;
"Originating goods" means products that qualify as
originating in accordance with the provisions of Rule 4;
"Packing" means the goods used to protect a good during its
transportation and also packaging material and containers in which a good is
packaged for retail sale;
"Preferential tariff treatment" means the preferential customs
duty rate and treatment available over the applied Most-Favoured-Nation customs
duty to originating goods pursuant to the rules of origin;
"Product" means the product being manufactured, even if it
is intended for later use in another manufacturing operation;
"Production" means methods of obtaining goods such as growing,
mining, harvesting, raising, breeding, extracting, gathering, collecting,
capturing, fishing, trapping, hunting, manufacturing, producing, processing or
assembling etc.;
"Product Specific Rules" means the rules that specify that the
non originating materials have undergone a change in tariff classification or a
specific manufacturing or processing operation, or satisfy an ad valorem
criterion or a combination of any of these criteria;
"Non-originating material" means any material whose country of
origin is other than the Parties (imported non-originating) and any material
whose origin cannot be determined (undetermined origin);
The "territory of India" means the territory of the Republic
of India including its territorial waters and the air space above its
territorial waters and the air space above it, and the other maritime zones
including the Exclusive Economic Zone and Continental Shelf over which Republic
of India has sovereignty, sovereign rights or exclusive jurisdiction in
accordance with its laws in force, the 1982 United Nations Convention on the law
of the sea and international law;
The "territory of Thailand" means the territory of the
Kingdom of Thailand including its territorial waters and the air space above its
territorial waters and the air space above it, and the other maritime zones
including the Exclusive Economic Zone and Continental Shelf over which Kingdom
of Thailand has sovereignty, sovereign rights or exclusive jurisdiction in
accordance with its laws in force, the 1982 United Nations Convention on the law
of the sea and international law;
Rule 3. Determination of Origin
No product shall be deemed to be originating in either Party unless the
conditions specified in these rules are complied with in relation to such
products and to the satisfaction of the respective Government Authorities
designated to issue the Certificate of Origin.
Rule 4. Originating Goods
For the purposes of these rules, products imported by a Party shall be deemed
to be originating and eligible for preferential tariff concessions if they
conform to the origin requirements under any one of the following :
-
Products which are wholly obtained or produced in the territory of the
exporting Party as set out and defined in Rule 5; or
-
Products not wholly produced or obtained in the territory of the exporting
Party provided that the said products are eligible under Rule 6 or Rule 7,
and Rule 8.
Rule 5. Wholly produced or obtained
Within the meaning of Rule 4 (a), the following shall be considered as wholly
produced or obtained in a Party:
-
Plant and plant products harvested or grown, there;
-
Live animals born and raised there;
-
Products obtained from live animals referred to in paragraph (b) above;
-
Products obtained by hunting, trapping, fishing, or aquaculture, conducted
there;
-
Minerals and other naturally occurring substances, not included in
paragraph (a) to (d), extracted or taken from its soil, waters, seabed or
beneath their seabed;
-
Products taken from the water, seabed or beneath the seabed outside the
territorial waters of a Party, provided that the Party has the rights to
exploit such water, seabed and beneath the seabed in accordance with the
United Nations Convention on the Law of the sea;
-
Products of sea fishing and other marine products taken from outside its
territory , by its vessels5,6;
-
Products processed and/or made on board its factory ships6,7 ,
exclusively from products referred to in paragraph (g) above;
-
Articles collected there which can no longer perform their original
purpose nor are capable of being restored or repaired and are fit only for
disposal or recovery of parts of raw materials, or for recycling purposes8;
and
-
Products obtained or produced in a Party solely from products referred to
in paragraphs (a) to (i) above.
Rule 6. Not-wholly produced or obtained
-
For the purposes of Rule 4(b), the following general criteria should be
applied, provided that the final process of the manufacture is performed
within the territory of the exporting Party and subject to Rule 8:
-
local value added content criterion,
-
a change in tariff classification criterion between the export product
and all non-originating materials used in its production.
-
Products specified in Annexure-A
which fulfill one or a combination of the above criteria shall be
considered as originating from the exporting Party provided that the final
process of the manufacture is performed within the territory of the
exporting Party and subject to Rule 8.
-
For the products not specified in Annexure-A as per Rule 6(b), the following
Criteria shall be applied in determining the origin of not-wholly
produced or obtained products provided that the final process of the
manufacture is performed within the territory of the exporting Party and
subject to Rule 8:
i. local value added content of 40% meaning thereby that the total value
of materials originating from the countries other than the Parties or of
undetermined origin (that is non-originating materials) used does not exceed
60% of the FOB value of the product so produced or obtained; and
ii. change in tariff heading at the 4 digit level of Harmonised System
where the final export product is classified differently from all the
non-originating materials used in its production.
- The formula for calculation of local value added content is as follows :
|
FOB value of the
export
product
|
– |
Value of non
originating
materials
|
x 100 = %
of Local Value Added Content (LVAC) |
|
______________________________________________
|
|
FOB value of
the export product
|
-
The value of the non-originating materials shall be :
-
the CIF value at the time of importation of the materials, parts or
produce; and/or
-
the earliest ascertained price paid for the materials, parts or
produce of undetermined origin in the territory of the Party where the
working or processing takes place.
Rule 7. Cumulative Rule Of Origin
Unless otherwise provided for, products which comply with origin requirements
provided for in Rule 4 and which are used in the territory of a Party as
materials for a finished product eligible for preferential treatment under the
Agreement shall be considered as products originating in the territory of the
Party where working or processing of the finished product has taken place
subject to fulfillment of conditions of Rule 8 and that the aggregate
India-Thailand value added content on the final product is not less than 40% or
a the local value added content specified for products in Annexure-
A.
Rule 8. Minimal Operation and Processes
The following operations or processes are considered to be insufficient to
confer the status of originating products, whether or not there is a change in
tariff classification:
-
Operations to ensure the preservation of products in good condition
during transport and storage (such as drying, freezing, keeping in brine,
ventilation, spreading out, chilling, placing in salt, sulphur dioxide or
other aqueous solutions, removal of damaged parts, and like operations);
-
Simple operations consisting of removal of dust, sifting or screening,
sorting, classifying, matching (including the making-up of sets of
articles), washing, painting, cutting;
-
Changes of packing and breaking up and assembly of consignments;
-
Simple slicing, and repacking or placing in bottles, flasks, bags,
boxes, fixing on cards or boards, etc.;
-
The affixing of marks, labels or other like distinguishing signs on
products or their packaging;
-
Simple mixing of products, provided the characteristics of the obtained
products are not essentially different from those of mixed products;
-
Simple assembly of parts of products to constitute a complete product;
-
Disassembly;
-
Slaughter of animals;
-
Mere dilution with water or another substance that does not materially
alter the characteristics of the goods;
-
Simple cleaning, including removal of oxide, oil, paint or other
coverings;
-
Oil application; and
-
A combination of any of the two operations referred to in (a) to (l).
Rule 9. Direct Consignment
The following shall be considered to be directly consigned from the exporting
Party to all custom points of the importing Party:
-
if the products are transported without passing through the territory of
any country other than the Parties;
-
the products whose transport involves transit through one or more
intermediate country with or without tran-shipment or temporary storage in
such countries, provided that:
-
The transit entry is justified for geographical reason or by
consideration related exclusively to transport requirements;
-
The products have not entered into trade or consumption there; and
-
The products have not undergone any operation there other than
unloading and reloading or any operation required to keep them in good
condition.
Rule 10. Treatment of Packing
(a) Packages and Packing Materials for retail sale:
-
The packages and packing materials for retail sale, when classified
together with the packaged product, according to General Rule 5(b) of the
Harmonised System, shall not be taken into account for considering whether
all non-originating materials used in the manufacture of a product fulfil
the criterion corresponding to a change of tariff classification of the said
product.
-
If the product is subject to an ad valorem percentage criterion, the
value of the packages and packing materials for retail sale shall be taken
into account in its origin assessment, in case they are treated as being one
for customs purposes with the products in question.
(b) Containers and packing materials for transport
The containers and packing materials exclusively used for the transport of a
product shall not be taken into account for determining the origin of any
product, in accordance with General Rule 5(b) of the Harmonized System.
Rule 11. Accessories, Spare Parts and Tools
Each Party shall provide that accessories, spare parts and tools delivered
with a product that form part of the product's standard accessories, spare parts
and tools, shall be treated as originating products if the product is an
originating product, and shall be disregarded in determining whether all the
non-originating materials used in the production of the product undergo the
applicable change in tariff classification, provided that:
-
The accessories, spare parts and/or tools are not invoiced separately
from the product;
-
The quantities and value of the accessories, spare parts and/or tools
are standard trade practice for the originating product in the domestic market
of the exporting Party; and
-
If the product is subject to a local value added content criterion ,
the value of such accessories, spare parts and/or tools shall be taken into
account as originating or non originating materials, as the case may be, in
calculating the local value added content.
Rule 12. Indirect Materials
An indirect material shall be treated as an originating material without
regard to where it is produced and its value shall be the cost registered in the
accounting records of the producer of the export product.
Rule 13. Identical And Interchangeable Materials
For the purposes of determining origin of product utilizing identical and
interchangeable originating and non originating materials, mixed or physically
combined, the origin of such materials can be determined by generally accepted
accounting principles of stock control applicable in the exporting Party .
Rule 14. Certification of Origin
A claim that products shall be accepted as eligible for preferential
concessions in the importing Party shall be supported by a Certificate of Origin
issued by a Government authority designated by the exporting Party and notified
to the other Party to the Agreement in accordance with the Operational
Certification Procedures, as set out in Annexure- B.
Rule 15. Review and Modification
These rules may be reviewed and modified as and when necessary upon request
of a Party and may be open to such reviews and modifications as may be agreed
upon.
back

PRODUCT SPECIFIC RULES
ANNEXURE- A
| Sl.No.
|
Tariff item (HS2002) |
Description of products |
Applicable Rule |
| 1604 |
Prepared or preserved fish;
caviar and caviar substitutes prepared from fish eggs. |
-
|
160411 |
- - Salmon |
Local Value Added Content not less than
20% |
|
160413 |
-- Sardines, sardinella and brisling or
sprats |
Local Value Added Content not less than
30% |
|
160415 |
- - Mackerel |
Local Value Added Content not less than
30% |
| 1605 |
Crustaceans,
molluscs and other aquatic invertebrates, prepared or preserved. |
|
160510 |
- Crab |
Local Value Added Content not less than
30% |
| 7104 |
Synthetic or reconstructed
precious or semi-precious stones, whether or not worked or graded but
not strung, mounted or set; ungraded synthetic or reconstructed
precious or semi-precious stones, temporarily strung for convenience
of transport. |
|
710490 |
- Other |
Change at 4-digit H.S level (Change to
subheading 710490 from any other headings), provided that there is a
Local Value Added Content not less than 20% |
| 7105 |
Dust and powder of
natural or synthetic precious or semi-precious stones. |
|
710510 |
- Of diamond |
Change at 4-digit H.S level (Change to
subheading 710510 from any other headings), provided that there is a
Local Value Added Content not less than 20% |
| 7113 |
Articles of jewellery and parts
thereof, of precious metal or of metal clad with precious metal |
|
711319 |
- - Of other precious metal, whether or
not plated or clad with precious metal |
Change at 4-digit H.S level (Change to
subheading 711319 from any other headings), provided that there is a
Local Value Added Content not less than 20% |
| 7307 |
Tube or pipe fittings (for
example, couplings, elbows, sleeves), of iron or steel |
-
|
730792 |
- - Threaded elbows, bends and sleeves |
Change at 4-digit H.S level (Change to
subheading 730792 from any other headings), provided that there is a
Local Value Added Content not less than 20% |
| 8413 |
Pumps for liquids, whether or
not fitted with a measuring device; liquid elevators. |
|
841381 |
- - Pumps |
Change at 6-digit H.S level (Change to
subheading 841381 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8414 |
Air or vacuum pumps, air or
other gas compressors and fans; ventilating or recycling hoods
incorporating a fan, whether or not fitted with filters. |
|
841451 |
- - Table, floor, wall, window, ceiling
or roof fans, with a self-contained electric motor of an output not
exceeding 125 W |
Change at 6-digit H.S level (Change to
subheading 841451 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
|
841459 |
- - Other |
Change at 6-digit H.S level (Change to
subheading 841459 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
|
841490 |
- Parts |
Change at 6-digit H.S level (Change to
subheading 841490 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8415 |
Air conditioning machines,
comprising a motor-driven fan and elements for changing the
temperature and humidity, including those machines in which the
humidity cannot be separately regulated. |
|
841510 |
- Window or wall types, self-contained
or "split-system" |
Change at 6-digit H.S level (Change to
subheading 841510 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8418 |
Refrigerators, freezers and
other refrigerating or freezing equipment, electric or other; heat
pumps other than air conditioning machines of heading 8415. |
|
841821 |
- - Compression-type |
Change at 6-digit H.S level (Change to
subheading 841821 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8437 |
Machines for cleaning, sorting
or grading seed, grain or dried leguminous vegetables; machinery used
in the milling industry or for the working of cereals or dried
leguminous vegetables, other than farm-type machinery. |
|
843780 |
- Other machinery |
Change at 6-digit H.S level (Change to
subheading 843780 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8479 |
Machines and mechanical
appliances having individual functions, not specified or included
elsewhere in this Chapter. |
|
847989 |
- - Other |
Change at 6-digit H.S level (Change to
subheading 847989 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8481 |
Taps, cocks, valves and similar
appliances for pipes, boiler shells, tanks, vats or the like,
including pressure-reducing valves and thermostatically controlled
valves. |
|
848180 |
- Other appliances |
Change at 6-digit H.S level (Change to
subheading 848180 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8482 |
Ball or roller bearings. |
|
848210
|
- Ball bearings |
Change at 6-digit H.S level (Change to
subheading 848210 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8504 |
Electrical transformers, static
converters (for example, rectifiers) and inductors. |
|
850431 |
- Having a power handling capacity not
exceeding 1 kVA |
Change at 6-digit H.S level (Change to
subheading 850431 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8512 |
Electrical lighting or
signalling equipment (excluding articles of heading 8539), windscreen
wipers, defrosters and demisters, of a kind used for cycles or motor
vehicles. |
|
851220 |
- Other lighting or visual signalling
equipment |
Change at 6-digit H.S level (Change to
subheading 851220 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8517 |
Electrical apparatus for line
telephony or line telegraphy, including line telephone sets with
cordless handsets and telecommunication apparatus for carrier-current
line systems or for digital line systems; videophones. |
|
851711 |
- Line telephone sets with cordless
handsets |
Change at 6-digit H.S level (Change to
subheading 851711 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
|
851790 |
- Parts |
Change at 6-digit H.S level (Change to
subheading 851790 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8528 |
Reception apparatus for
television, whether or not incorporating radio-broadcast receivers or
sound or video recording or reproducing apparatus; video monitors and
video projectors. |
|
852812 |
- - Colour |
Change at 6-digit H.S level (Change to
subheading 852812 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 8540 |
Thermionic, cold cathode or
photo-cathode valves and tubes (for example, vacuum or vapour or gas
filled valves and tubes, mercury arc rectifying valves and tubes,
cathode-ray tubes, television camera tubes). |
|
854011 |
- - Colour |
Change at 6-digit H.S level (Change to
subheading 854011 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
| 9032 |
Automatic regulating or
controlling instruments and apparatus. |
|
903289 |
- - Other |
Change at 6-digit H.S level (Change to
subheading 903289 from any other subheadings), provided that there is
a Local Value Added Content not less than 40% |
back

ANNEXURE-B
Operational Certification
Procedures
FOR INTERIM RULES OF ORIGIN FOR PRODUCTS ELIGIBLE FOR PREFERENTIAL TARIFF FOR
THE EARLY HARVEST SCHEME UNDER THE FRAMEWORK AGREEMENT FOR ESTABLISHING FREE
TRADE AREA BETWEEN THE REPUBLIC OF INDIA AND THE KINGDOM OF THAILAND
For the purpose of implementing the Interim Rules of Origin for the Early
Harvest Scheme under the Framework Agreement for Establishing Free Trade Area
between India and Thailand (ITFTA) the following operational procedures on the
issuance and verification of the Certificate of Origin (Form FTA) and the other
related administrative matters, shall be followed:
AUTHORITIES
Rule 1
The Certificate of Origin shall be issued by the Government authorities of
the exporting Party.
Rule 2
-
The Parties shall submit each other of the names and addresses of their
respective Government authorities issuing the Certificate of Origin as well
as provide specimen signatures and specimen of official seals used by the
Government authorities.
-
Any change in names, addresses, or official seals shall be promptly
informed in the same manner.
Rule 3
For the purpose of verifying the conditions for preferential treatment, the
Government authority designated to issue the Certificate of Origin (herein after
refered to as Issuing Authority) shall have the right to call for any supporting
documentary evidence or to carry out any check considered appropriate.
APPLICATIONS
Rule 4
The manufacturer and/or exporter of the products qualified for preferential
treatment shall apply in writing to the relevant Issuing Authority requesting
for the pre-exportation verification of the origin of the products. The result
of the verification, subject to review periodically or whenever appropriate,
shall be accepted as the supporting evidence in verifying the origin of the said
products to be exported thereafter. The pre-exportation verification may not
apply to the products of which, by their nature, origin can be easily verified.
Rule 5
Before exporting the products under preferential treatment, the exporter or
his authorized representative shall submit a written application for the
Certificate of Origin together with appropriate supporting documents proving
that the products to be exported qualify for the issuance of Certificate of
Origin.
PRE-EXPORTATION EXAMINATION
Rule 6
The Issuing Authority shall, to the best of their competence and ability,
carry out proper examination upon each application for the Certificate of Origin
to ensure that:
-
The application and the Certificate of Origin are duly completed and
signed by the authorized signatory;
-
The origin of the product is in conformity with the India-Thailand Interim
Rules of Origin;
-
The other statements of the Certificate of Origin correspond to supporting
documentary evidence submitted;
-
Description, quantity and weight of goods, marks and number of packages,
number and kinds of packages, as specified, conform to the consignment to be
exported.
ISSUANCE OF CERTIFICATE OF ORIGIN
Rule 7
-
The validity of the Certificate of Origin shall be 12 months from the date
of its issuance.
-
The Certificate of Origin must be on ISO A4 size paper in conformity to
the specimen shown in Attachment
1. It shall be made in English.
-
The Certificate of Origin shall comprise of one original and three (3)
carbon copies of the following colours:
| Original |
- |
blue |
| Duplicate |
- |
white |
| Triplicate |
- |
white |
| Quadruplicate |
- |
white |
-
Each Certificate of Origin shall bear a printed distinctive number and a
reference number separately given by each place or office of issuance.
-
The original copy, together with the triplicate, shall be forwarded by the
exporter to the importer for submission of the original copy to the Customs
Authority at the port or place of importation. The duplicate shall be
retained by the issuing authority in the exporting Party. The triplicate
shall be retained by the importer and the quadruplicate shall be retained by
the exporter.
Rule 8
To implement the provisions of Rule 5, Rule 6 and Rule 7 of the
India-Thailand Interim Rules of Origin, the Certificate of Origin issued by the
exporting Party shall indicate the relevant rules and applicable percentage of
local value added content in Box 8.
Rule 9
Neither erasures nor superimpositions shall be allowed on the Certificate of
Origin. Any alteration shall be made by striking out the erroneous materials and
making any addition required. Such alterations shall be approved by an official
authorized signing the Certificate of Origin and certified by the Issuing
Authority. Unused spaces shall be crossed out to prevent any subsequent
addition.
Rule 10
-
The Certificate of Origin shall be issued by the relevant Issuing
Authority of the exporting party at the time of exportation whenever the
products to be exported can be considered originating in that Party within
the meaning of the India-Thailand Interim Rules of Origin.
-
In exceptional cases where a Certificate of Origin has not been issued at
the time of exportation due to involuntary errors or omissions or other
valid causes, the Certificate of Origin may be issued retroactively but no
longer than 45 days from the date of shipment, bearing the word "ISSUED
RETROACTIVELY"
Rule 11
In the event of theft, loss or destruction of a Certificate of Origin, the
exporter may apply in writing to the Issuing Authority which issued it for a
certified true copy of the original and the triplicate to be made on the basis
of the export documents in their possession bearing the endorsement of the word
"CERTIFIED TRUE COPY FOR THE ORIGINAL CERTIFICATE NO…DATED…" in
Box 12. This copy shall bear the date of the original Certificate of Origin. The
certified true copy of a Certificate of Origin shall be issued within the
validity period of the original Certificate of Origin and on condition that the
exporter provides to the relevant issuing authority the quadruplicate copy. The
validity of certified true copy of the Certificate of Origin would be same as
that of the original certificate so issued.
PRESENTATION
Rule 12
The Original Certificate of Origin shall be submitted to the Customs
Authority at the time of lodging the import entry for the products concerned.
Rule 13
The following time limit for the presentation of the Certificate of Origin
shall be observed:
-
Certificate of Origin must be submitted to the Customs Authority of the
importing Party within the validity period from the date of endorsement by
the relevant Issuing Authority of the exporting Party;
-
Where the Certificate of Origin is submitted to the relevant Government
authority of the importing party after the expiration of the validity of the
Certificate of Origin, such Certificate is still to be accepted when failure
to observe the time-limit results from force majeure or other valid causes
beyond the control of the exporter; and
-
In all cases, the relevant Government authority in the importing party may
accept such Certificate of Origin provided that the products have been
imported before the expiration of the validity of the Certificate of Origin.
Rule 14
The discovery of minor discrepancies between the statements made in the
Certificate of Origin and those made in the documents submitted to the Customs
Authority of the importing Party for the purpose of carrying out the formalities
for importing the products shall not ipso-facto invalidate the Certificate of
Origin, if it does in fact correspond to the said products.
Rule 15
-
The importing Party may request a retroactive check at random and/or when
it has reasonable doubt as to the authenticity of the document or as to the
accuracy of the information regarding the true origin of the products in
question or of certain parts thereof.
-
The request shall be accompanied with the Certificate of Origin concerned
and shall specify the reasons and any additional information suggesting that
the particular given on the said Certificate of Origin may be inaccurate,
unless the retroactive check is requested on a random basis.
-
The Customs Authority of the importing Party may suspend the provisions on
preferential treatment while awaiting the result of verification. However,
it may release the products to the importer subject to any administrative
measures deemed necessary, provided that they are not held to be subject to
import prohibition or restriction and there is no suspicion of fraud.
-
The Issuing Authority receiving a request for retroactive check shall
respond within three (3) months after the receipt of the request.
Rule 16
-
The application for Certificates of Origin and all documents related to
such application shall be retained by the Issuing Authority for not less than
two (2) years from the date of issuance.
-
Information relating to the validity of the Certificate of Origin shall be
furnished upon request of the importing Party by an official authorized
signing the Certificate of Origin and certified by the Issuing Authority.
-
Any information communicated among the government authorities shall be
treated as confidential and shall be used for the validation of Certificates
of Origin purposes only.
SPECIAL CASES
Rule 17
When destination of all or parts of the products exported to specified port
is changed, before or after their arrival in the territory of the party, the
following Rules shall be observed:
-
If the products have already been submitted to the Customs Authority in
the specified importing port, the Certificate of Origin shall, by a written
application of the importer, be endorsed to this effect for all or parts of
products by the said authority and the original returned to the importer.
-
If the changing of destination occurs during transportation to the
importing Party as specified in the Certificate of Origin, the exporter
shall apply in writing, accompanied with the issued Certificate of Origin,
for the new issuance for all or parts of products.
Rule 18
For the purpose of implementing Rule 9 (b) of the India-Thailand Interim
Rules of Origin, where transportation is effected through the territory of one
or more non- parties, the following shall be produced to the Government
authorities of the importing party:
-
A through Bill of Lading issued in the exporting Party;
-
A Certificate of Origin issued by the relevant Government authority of the
exporting Party;
-
A copy of the original commercial invoice in respect of the product; and
-
Supporting documents in evidence that the requirements of Rule 9 (b) of
the India-Thailand Interim Rules of Origin are being complied with.
Rule 19
- Products sent from an exporting Party for exhibition in another party and
sold during or after the exhibition for importation into a party shall benefit
from the India-Thailand preferential tariff treatment on the condition that
the products meet the requirements of the India-Thailand Interim Rules of
Origin provided it is shown to the satisfaction of the relevant Government
authorities of the importing Party that:
-
(i) An exporter has dispatched those products from the territory of the
exporting Party to the Country where the exhibition is held and has exhibited
them there,
-
(ii) The exporter has sold the goods or transferred them to a consignee in
the importing Party; and
-
(iii) The products have been sold during the exhibition or immediately
thereafter to the importing Party in the state in which they were sent for the
exhibition.
-
For the purpose of implementing the above provisions, the Certificate of
Origin must be produced to the relevant Government authorities of the
importing Party. The name and address of the exhibition must be indicated, a
certificate issued by the relevant Government authority of the Party where the
exhibition took place together with supporting documents prescribed in Rule
18(d) may be required.
-
Paragraph (a) shall apply to any exhibitions, fairs or similar shows or
displays where the products remain under Customs control during these events.
ACTION AGAINST FRAUDULENT ACTS
Rule 20
-
When it is suspected that fraudulent acts in connection with the
Certificate of Origin have been committed, the Government Authorities concerned
shall cooperate for appropriate action to be taken in the respective Party
against the persons involved.
-
Each Party shall provide legal sanctions for fraudulent acts related to
the Certificate of Origin.
Rule 21
In the case of a dispute concerning origin determination, classification of
products or other matters, the Government authorities concerned in the importing
and exporting Parties shall consult each other with a view to resolving the
dispute.
back

Format for Certificate of
Origin


back
